Measurement System and Coordinate System: Difference between revisions

From PHENOM Portal Knowledgebase
Jump to navigation Jump to search
VisualWikitext
 
(14 intermediate revisions by the same user not shown)
Line 1: Line 1:
== Creating & Editing Measurement System ==
== Creating & Editing Measurement System ==
To create a Measurement System, select Measurement System under the Create > Logical dropdown menu:
To create a Measurement System, select the option from the Create > Logical dropdown menu:


[[File:Phenom-data model-meas syst create.png|1200px|border]]
[[File:Phenom-data model-meas syst create.png|1200px|border]]


Measurement Systems can either be regular or Standard. The process to create/edit the two types is slightly different.
=== Measurement System ===
There are a few requirements to create a Measurement System, it needs to have:
There are a few requirements to create a Measurement System, it needs to have:
* A unique name
* A unique name
Line 9: Line 12:
* At least one Measurement System Axis
* At least one Measurement System Axis


Unique name,
The user can select a Coordinate System from the list. Information about the selected Coordinate System will be displayed below the list. Clicking on "Select Coordinate System" collapses/expands the list.
Coordinate System,
At least one Measurement System Axis
Requirements for Standard Measurement System:
Unique name,
Reference Standard
Creating a new Measurement System:
Select Measurement System under the Create dropdown menu


[[File:Phenom-data model-details meas syst coord syst.png|500px|border]]


The user can select one or more Measurement System Axes from the list. Information about the selected Measurement System Axes will be displayed below the list. To unselect a Measurement System Axis, the user needs to click again on it, it won't be highlighted and its information box will be removed. Clicking on "Select Existing Measurement System Axis" collapses/expands the list. The user can also create new Measurement System Axes, this is explained [[Measurement Systems & Coordinate Systems#Creating & Editing Measurement System Axis|below]]


Toggling between Measurement System and Standard Measurement System
[[File:Phenom-data model-details meas syst meas syst axis.png|800px|border]]
On the Measurement System create editor, you are able to switch between the two types of Measurement Systems
The input values on the page will change.


After the Measurement System is created, the user will be able to create [[Reference Points]] and see the ones already added.


Toggling Selection Box:
[[File:Phenom-data model-details meas syst ref point.png|800px|border]]
Each Selection box can be toggled on and off by clicking on "Choose" or "Close


The Conversions section is not editable. Once the Measurement System is created, the table will be filled with Conversions which source or target is the selected Measurement System.


=== Standard Measurement System ===
There are a few requirements to create a Standard Measurement System, it needs to have:
* A unique name
* A Reference Standard


Making a selection:
[[File:Phenom-data model-meas syst create standard.png|1000px|border]]
After making a selection, additional information will appear. You can click on its name (circled in red) to navigate to the corresponding page.
 
 
 
Selecting multiple Measurement System Axes:
You can add additional Axes by clicking on a non-highlighted node.
You can remove a selected Axis by clicking on a highlighted node.
 
 
 
Saving
When all desired fields are filled in, click on SAVE in the upper right corner


== Creating & Editing Measurement System Axis ==
== Creating & Editing Measurement System Axis ==
Requirements for Measurement System Axis:
To create a Measurement System Axis, select the option from the Create > Logical dropdown menu:


Unique name,
[[File:Phenom-data model-details meas axis create.png|1200px|border]]
Coordinate System Axis,
At least one Value Type Unit
Creating a new Measurement System Axis:
Select Measurement System Axis under the Create drop-down menu


There are a few requirements to create a Measurement System Axis, it needs to have:
* A unique name
* A Coordinate System Axis
* At least one Value Type Unit


The user can select a Coordinate System Axis from the list. Information about the selected Coordinate System Axis will be displayed below the list. Clicking on "Select Coordinate System Axis" collapses/expands the list.


Toggling Selection Box:
The user can add one or more Valut Type Unit(s). Clicking "Add Value Type Unit" will add a creation form.
Each selection box can be toggled on and off by clicking on "Choose" or "Close"
 
 
 
Collapsible Value Type Units:
By clicking the name of the Value Type Unit, you can either choose to show or hide the contents.
 
 
Adding Constraints
When you add a new constraint, it will be added to the other Value Type Unit constraint's drop-down menu.
 
 
 
In addition, a new section will appear underneath the Value Type Units to show the contents of the most recently added Constraint:
 
 
 
Saving
When all desired fields are filled in, click on SAVE in the upper right corner
 
 


[[File:Phenom-data model-details meas syst axis vtu.png|1000px]]


If the user doesn't find the correct constraint, she/he can add one by clicking the "Add Constraint" button. This will open a [[Constraint]] creation form. After the Constraint is created, it will be added to other Value Type Unit Constraint's dropdown list.


== Creating & Editing Coordinate System ==
== Creating & Editing Coordinate System ==
Requirements for Measurement System Axis:
To create a Coordinate System, select the option from the Create > Logical dropdown menu:
 
Unique name,
Coordinate System Axis,
 
 
Creating a new Coordinate System:
Select Coordinate System under the Create drop-down menu.
 
 
 
Toggling Selection Box:
Each selection box can be toggled on and off by clicking on "Choose" or "Close"
 
 
 
Saving
When all desired fields are filled in, click on SAVE in the upper right corner


[[File:Phenom-data model-details coord syst create.png|1200px|border]]


There are a few requirements to create a Coordinate System, it needs to have:
* A unique name
* A Coordinate System Axis


The user can select a Coordinate System Axis from the list. Information about the selected Coordinate System Axis will be displayed below the list. Clicking on "Select Coordinate System Axis" collapses/expands the list.


The Conversions section is not editable. Once the Coordinate System is created, the table will be filled with Conversions which source or target is the selected Coordinate System.


== Creating & Editing Coordinate System Axis ==
== Creating & Editing Coordinate System Axis ==
Requirements for Measurement System Axis:
To create a Coordinate System Axis, select the option from the Create > Logical dropdown menu:
 
Unique name,
Creating a new Coordinate System Axis:
Select Coordinate System Axis under the Create drop-down menu.
 
 
 
Input Boxes:
Fill in the desired input fields.
 


[[File:Phenom-data model-details coord syst axis create.png|1200px|border]]


Saving
The only requirement to create a Measurement System Axis is a unique name.
When all desired fields are filled in, click on SAVE in the upper right corner

Latest revision as of 14:37, 26 September 2022

Creating & Editing Measurement System

To create a Measurement System, select the option from the Create > Logical dropdown menu:

Measurement Systems can either be regular or Standard. The process to create/edit the two types is slightly different.

Measurement System

There are a few requirements to create a Measurement System, it needs to have:

  • A unique name
  • A Coordinate System
  • At least one Measurement System Axis

The user can select a Coordinate System from the list. Information about the selected Coordinate System will be displayed below the list. Clicking on "Select Coordinate System" collapses/expands the list.

The user can select one or more Measurement System Axes from the list. Information about the selected Measurement System Axes will be displayed below the list. To unselect a Measurement System Axis, the user needs to click again on it, it won't be highlighted and its information box will be removed. Clicking on "Select Existing Measurement System Axis" collapses/expands the list. The user can also create new Measurement System Axes, this is explained below

After the Measurement System is created, the user will be able to create Reference Points and see the ones already added.

The Conversions section is not editable. Once the Measurement System is created, the table will be filled with Conversions which source or target is the selected Measurement System.

Standard Measurement System

There are a few requirements to create a Standard Measurement System, it needs to have:

  • A unique name
  • A Reference Standard

Creating & Editing Measurement System Axis

To create a Measurement System Axis, select the option from the Create > Logical dropdown menu:

There are a few requirements to create a Measurement System Axis, it needs to have:

  • A unique name
  • A Coordinate System Axis
  • At least one Value Type Unit

The user can select a Coordinate System Axis from the list. Information about the selected Coordinate System Axis will be displayed below the list. Clicking on "Select Coordinate System Axis" collapses/expands the list.

The user can add one or more Valut Type Unit(s). Clicking "Add Value Type Unit" will add a creation form.

If the user doesn't find the correct constraint, she/he can add one by clicking the "Add Constraint" button. This will open a Constraint creation form. After the Constraint is created, it will be added to other Value Type Unit Constraint's dropdown list.

Creating & Editing Coordinate System

To create a Coordinate System, select the option from the Create > Logical dropdown menu:

There are a few requirements to create a Coordinate System, it needs to have:

  • A unique name
  • A Coordinate System Axis

The user can select a Coordinate System Axis from the list. Information about the selected Coordinate System Axis will be displayed below the list. Clicking on "Select Coordinate System Axis" collapses/expands the list.

The Conversions section is not editable. Once the Coordinate System is created, the table will be filled with Conversions which source or target is the selected Coordinate System.

Creating & Editing Coordinate System Axis

To create a Coordinate System Axis, select the option from the Create > Logical dropdown menu:

The only requirement to create a Measurement System Axis is a unique name.

Retrieved from "https://kb.phenomportal.com/index.php?title=Measurement_System_and_Coordinate_System&oldid=839"